The a-X1 Mediaworkstation provides up to 64 cores on a single AMD EPYC 7002 Series CPU and up to 2TB RAM. It’s ideal for heavily multi-threaded applications, but also provides three PCIe 3.0 x16 and three PCIe 3.0 x8 slots for multiple GPUs, high speed NICs and more.
Not sure what the best configuration for your application usage is? Give us a call at 424-235-7479 and we’ll help you configure your workstation.
a-X1 - Tech Specs
- Dimensions & Weight
- 22.85″ x 11.55 x 23.25″, 66-78 lbs
- CPU
- – Single AMD EPYC™ 7001/7002* series Processor (*Board revision 2.x required)
– Socket SP3
- Cores
- – Up to 32 Cores
– Up to 64 Cores (Board revision 2.x required)
- Chipset
- System on Chip
- System Memory Capacity
- – 8 DIMM slots
– Supports up to 1TB Registered ECC DDR4 2666MHz SDRAM in 8 DIMMs
– Supports up to 2TB Registered ECC DDR4 3200MHz SDRAM (Board revision 2.x required)
– 8-channel memory bus
- Memory Type
- – DDR4 2666 MHz Registered ECC, 288-pin gold-plated DIMMs
– DDR4 3200 MHz Registered ECC, 288-pin gold-plated DIMMs (Board revision 2.x required)
- DIMM Sizes
- 8GB, 16GB, 32GB, 64GB, 128GB, 256GB* (*Board revision 2.x required)
- Memory Voltage
- 1.2V
- Error Detection
- – Corrects single-bit errors
– Detects double-bit errors (using ECC memory)
- SATA
- SATA3 (6 Gbps)
- SAS
- – Broadcom 3008 SAS3 (12 Gbps) controller
– RAID 0, 1, 10
- IPMI
- – Support for Intelligent Platform Management Interface v.2.0
– IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
– ASPEED AST2500 BMC
- Network Controllers
- – 2 1GbE LAN via Intel® I210
– 1 Realtek RTL8211E PHY (dedicated IPMI)
- VGA
- ASPEED AST2500 BMC
- I/O SAS
- 8 SAS3 (12 Gbps) ports
- I/O SATA
- 8 SATA3 (6 Gbps) ports
- I/O NVMe
- 2 PCI-E 3.0 NVMe x4 Internal Ports
- I/O LAN
- – 2 RJ45 Gigabit Ethernet LAN ports
– 1 RJ45 Dedicated IPMI LAN port
- I/O USB
- – 5 USB 3.0 ports
(2 rear + 2 via header + 1 Type A)
– 4 USB 2.0 ports (2 rear + 2 via header)
- I/O VGA
- 1 VGA port
- I/O Others
- – 1 COM port (rear)
– 2 SATA DOM power connector
– 1 TPM 2.0 header
- Expansion Slots PCI-Express
- – 3 PCI-E 3.0 x8
– 3 PCI-E 3.0 x16
- M.2
- – Interface: PCI-E 3.0 x4
– Key: M-key
- Chassis 1U
- – SC813MFTQC-350CB2
– SC813MFTQC-R407CB
- Chassis 2U
- – SC213AC-R1K23LPB
– SC216BE1C4-R1K23LPB
– SC825TQC-R740LPB
– SC826BE1C4-R1K23LPB
- Chassis 3U
- – SC836BE1C-R1K23B
- Chassis 4U
- – SC745BAC-R1K28B2
– SC846BE1C-R1K23B
- System BIOS Type
- AMI 128Mb SPI Flash EEPROM
- System BIOS Features
- – Plug and Play (PnP)
– DMI 2.3
– PCI 2.2
– ACPI 5.1
– USB Keyboard Support
– SMBIOS 3.1.1
- Management Software
- – Super Doctor 5
– Watch Dog
– NMI
– SUM
– IPMI 2.0, KVM with dedicated LAN
- Power Configurations
- – ACPI Power Management
– Power-on mode control for AC power loss recovery
- PC Health Monitoring CPU
- – Monitors CPU Core Voltages, +1.8V, +3.3V, +5V, +5V standby, +3.3V standby
– CPU switching voltage regulator
– Supports system management utility
– VBAT
- FAN
- – Up to 7-fan status tachometer monitoring
– Up to 7 4-pin fan headers
– Dual Cooling Zone
– Status monitor for speed control
– Pulse Width Modulated (PWM) fan connectors
- Temperature
- – Monitoring for CPU and chassis environment
– CPU Thermal Trip Support
– Thermal control for 7x Fan connectors
– I²C Temperature Sensing Logic
- LED
- CPU / System Overheat LED
- Other Features
- – Chassis Intrusion Detection
– Chassis Intrusion Header
– UID
- Environmental Specifications
- – Operating Temperature: 10°C to 35°C (50°F to 95°F)
– Non-operating Temperature: -40°C to 70°C (-40°F to 158°F)
– Operating Relative Humidity: 8% to 90% (non-condensing)
– Non-operating Relative Humidity: 5% to 95% (non-condensing)
Reviews
There are no reviews yet.