The a-X1P mobile workstation is the portable version of our a-X1, a powerful Single AMD EPYC CPU with up to 64 Cores and 3 GPUs ideal for field work.
Not sure what the best configuration for your application usage is? Give us a call at 424-235-7479 and we’ll help you configure your workstation.
a-X1P - Tech Specs
- Dimensions & Weight
- 17.05″ x 13.68″ x 9.03″, 30-42 lbs
- CPU
- – Single AMD EPYC™ 7001/7002* series Processor (*Board revision 2.x required)
– Socket SP3
- Cores
- – Up to 32 Cores
– Up to 64 Cores (Board revision 2.x required)
- Chipset
- System on Chip
- System Memory Capacity
- – 8 DIMM slots
– Supports up to 1TB Registered ECC DDR4 2666MHz SDRAM in 8 DIMMs
– Supports up to 2TB Registered ECC DDR4 3200MHz SDRAM (Board revision 2.x required)
– 8-channel memory bus
- Memory Type
- – DDR4 2666 MHz Registered ECC, 288-pin gold-plated DIMMs
– DDR4 3200 MHz Registered ECC, 288-pin gold-plated DIMMs (Board revision 2.x required)
- DIMM Sizes
- 8GB, 16GB, 32GB, 64GB, 128GB, 256GB* (*Board revision 2.x required)
- Memory Voltage
- 1.2V
- Error Detection
- – Corrects single-bit errors
– Detects double-bit errors (using ECC memory)
- SATA
- SATA3 (6 Gbps)
- SAS
- – Broadcom 3008 SAS3 (12 Gbps) controller
– RAID 0, 1, 10
- IPMI
- – Support for Intelligent Platform Management Interface v.2.0
– IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
– ASPEED AST2500 BMC
- Network Controllers
- – 2 1GbE LAN via Intel® I210
– 1 Realtek RTL8211E PHY (dedicated IPMI)
- VGA
- ASPEED AST2500 BMC
- I/O SAS
- 8 SAS3 (12 Gbps) ports
- I/O SATA
- 8 SATA3 (6 Gbps) ports
- I/O NVMe
- 2 PCI-E 3.0 NVMe x4 Internal Ports
- I/O LAN
- – 2 RJ45 Gigabit Ethernet LAN ports
– 1 RJ45 Dedicated IPMI LAN port
- I/O USB
- – 5 USB 3.0 ports
(2 rear + 2 via header + 1 Type A)
– 4 USB 2.0 ports (2 rear + 2 via header)
- I/O VGA
- 1 VGA port
- I/O Others
- – 1 COM port (rear)
– 2 SATA DOM power connectors
– 1 TPM 2.0 header
- Expansion Slots PCI-Express
- – 3 PCI-E 3.0 x8
– 2 PCI-E 3.0 x16
- Expansion Slots M.2
- – Interface: PCI-E 3.0 x4
– Key: M-key
- Chassis 1U
- – SC813MFTQC-350CB2
– SC813MFTQC-R407CB
- Chassis 2U
- – SC213AC-R1K23LPB
– SC216BE1C4-R1K23LPB
– SC826BE1C4-R1K23LPB
– SC829HE1C4-R1K62LPB
- Chassis 3U
- SC836BE1C-R1K23B
- Chassis 4U
- – SC745BAC-R1K28B2
– SC846BE1C-R1K23B
- System BIOS Type
- AMI 128Mb SPI Flash EEPROM
- System BIOS Features
- – Plug and Play (PnP)
– DMI 2.3
– PCI 2.2
– ACPI 5.1
– USB Keyboard Support
– SMBIOS 3.1.1
- Management Software
- – Super Doctor 5
– Watch Dog
– NMI
– SUM
– IPMI 2.0, KVM with dedicated LAN
- Power Configurations
- – ACPI Power Management
– Power-on mode control for AC power loss recovery
- PC Health Monitoring CPU
- – Monitors CPU Core Voltages, +1.8V, +3.3V, +5V, +5V standby, +3.3V standby
– CPU switching voltage regulator
– Supports system management utility
– VBAT
- FAN
- – Up to 7-fan status tachometer monitoring
– Up to 7 4-pin fan headers
– Dual Cooling Zone
– Status monitor for speed control
– Pulse Width Modulated (PWM) fan connectors
- Temperature
- – Monitoring for CPU and chassis environment
– CPU Thermal Trip Support
– Thermal control for 7x Fan connectors
– I²C Temperature Sensing Logic
- LED
- CPU / System Overheat LED
- Other Features
- – Chassis Intrusion Detection
– Chassis Intrusion Header
– UID
- Environmental Specifications
- – Operating Temperature: 10°C to 35°C (50°F to 95°F)
– Non-operating Temperature: -40°C to 70°C (-40°F to 158°F)
– Operating Relative Humidity: 8% to 90% (non-condensing)
– Non-operating Relative Humidity: 5% to 95% (non-condensing)
Reviews
There are no reviews yet.