The SYS-1029GQ-TRT Supermicro GPU Server offers 4GPUs in a single 1U GPU server. Capable of providing 160 GPUs in a single 42U rack, the SYS-1029GQ-TRT server maximizes GPU rendering power with scalability. With up to 56 cores in dual Xeon Scalable CPUs, 1.5TB of RAM, up to 4 Tesla or Quadro GPUs, two additional x16 low profile slots and dual 10GbE ports, the SYS-1029GQ-TRT is a best-in-class 1U GPU server solution for GPU-accelerated workflows.
SYS-1029GQ-TRT - Tech Specs
- CPU
- – Dual Socket P (LGA 3647)
– 2nd Gen Intel® Xeon® Scalable Processors and Intel® Xeon® Scalable Processors‡,
3 UPI up to 10.4GT/s
– Support CPU TDP up to 165W
- Cores
- Up to 28 Cores
- Note
- ‡ BIOS version 3.2 or above is required to support 2nd Gen Intel® Xeon® Scalable processors (codenamed Cascade Lake-R)
‡‡ Extended thermal solutions may be required to support CPUs higher than 165W TDP, please contact Supermicro Technical Support for additional information.
- GPU Support
- Please refer to: Compatible GPU list
- System Memory Capacity
- – 12 DIMM slots
– Up to 3TB 3DS ECC DDR4-2933MHz†RDIMM/LRDIMM
– Supports Intel® Optaneâ„¢ DCPMM†â€
- Memory Type
- 2933†/2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM
- System Memory Note
- †2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro
††Cascade Lake only. Contact your Supermicro sales rep for more info.
- Chipset
- Intel® C621 chipset
- SATA
- SATA3 (6Gbps); RAID 0, 1, 5, 10
- Network Connectivity
- – Intel® X540 Dual Port 10GBase-T
– Virtual Machine Device Queues reduce I/O overhead
– Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- IPMI
- – Support for Intelligent Platform Management Interface v.2.0
– IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- Graphics
- ASPEED AST2500 BMC
- I/O SATA
- 4 SATA3 (6Gbps) ports
- LAN
- – 2 RJ45 10GBase-T ports
– 1 RJ45 Dedicated IPMI LAN port
- USB
- 2 USB 3.0 ports (rear)
- Video
- 1 VGA port
- Serial Header
- 1 Fast UART 16550 header
- System BIOS Type
- AMI 32Mb SPI Flash ROM
- Management Software
- – Intel® Node Manager
– IPMI 2.0
– KVM with dedicated LAN
– SSM, SPM, SUM
– SuperDoctor® 5
– Watchdog
- PC Health Monitoring CPU
- – Monitors for CPU Cores, Chipset Voltages, Memory.
– 4+1 Phase-switching voltage regulator
- FAN
- – Fans with tachometer monitoring
– Status monitor for speed control
– Pulse Width Modulated (PWM) fan connectors
- Temperature
- – Monitoring for CPU and chassis environment
– Thermal Control for fan connectors
- Dimensions and Weight
- – 1.7″ (43mm) x 17.2″ (437mm) x 35.2″ (894mm)
– 39.3″ (997mm) with rails
Package:
– 24″ (H) x 8″ (W) x 46″ (D)
Weight:
– 45 lbs (20.4 kg) – 58 lbs (26.31 kg)
- Front Panel Buttons
- – Power On/Off button
– System Reset button
- Front Panel LEDs
- – Power LED
– Hard drive activity LED
– Network activity LEDs
– System Overheat LED / Fan fail LED /
– UID LED
- Expansion Slots PCI-Express
- – 4 PCI-E 3.0 x16 (FHFL) slots
– 2 PCI-E 3.0 x16 (LP) slots
- Drive Bays Hot-swap
- 2 Hot-swap 2.5″ SAS/SATA drive bays
- Drive Bays Fixed
- 2 Internal 2.5″ SATA drive bays
- Drive Bays M.2
- – Support 1x M.2 2242/2260/2280
– Support M.2 SATA and NVMe
- System Cooling Fans
- 9 Heavy duty 4cm counter-rotating fans with air shroud & optimal fan speed control
- Total Output Power
- – 1000W: 100 – 120Vac
– 1800W: 200 – 220Vac
– 1980W: 220 – 230Vac
– 2000W: 230 – 240Vac
– 2000W: 200 – 240Vac (UL/CUL only)
- Power Supply Dimension (W x H x L)
- 73.5 x 40 x 265 mm
- Power Supply Input
- – 100-120Vac / 12.5-9.5A / 50-60Hz
– 200-220Vac / 10-9.5A / 50-60Hz
– 220-230Vac / 10-9.8A / 50-60Hz
– 230-240Vac / 10-9.8A / 50-60Hz
– 200-240Vac / 11.8-9.8A / 50-60Hz (UL/cUL only)
- Power Supply +12V
- – Max: 83.3A / Min: 0A (100-120Vac)
– Max: 150A / Min: 0A (200-220Vac)
– Max: 165A / Min: 0A (220-230Vac)
– Max: 166.7A / Min: 0A (230-240Vac)
– Max: 166.7A / Min: 0A (200-240Vac) (UL/cUL only)
- Power Supply 12Vsb
- Max: 2.1A / Min: 0A
- Power Supply Output Type
- 25 Pairs Gold Finger Connector
- Operating Environment RoHS
- RoHS Compliant
- Environmental Spec.
- – Operating Temperature: 10°C ~ 35°C (50°F ~ 95°F)
– Non-operating Temperature: -40°C to 60°C (-40°F to 140°F)
– Operating Relative Humidity: 8% to 90% (non-condensing)
– Non-operating Relative Humidity: 5% to 95% (non-condensing)
Reviews
There are no reviews yet.